RFXCOM blog

Firmware changes in versions 433_1013
– Kangtai is Cotech, SilverLine,… added (Ext2)
– Kerui improved

RFXmngr program version 18.0.0.17
– Lighting5 – Kangtai added
– Screenline commands updated
– ASA id displayed

Firmware changes in versions 433_1012
– Screenline added (Ext2)
– Kerui improved (Ext2 + X10 enabled)
– Mertik G6R-H4T1 improved
– MCZ check on valid command added

RFXmngr program version 18.0.0.14
– BlindsT13 – Screenline added
– MCZ ID displayed
– MCZ No Air added

RFXmngr program version 18.0.0.15
– SEAV changed

RFXmngr program version 18.0.0.16
– MCZ zero fan speed added
– MCZ check on valid commands added

Firmware changes in versions 433_1011
– MCZ pellet stove 3 fan model added

RFXmngr program version 18.0.0.13
– MCZ 3 fans selection added

Firmware changes in versions 433_1010
– Marquant 934134 added in Type2
– ARC undecoded updated

RFXmngr program version 18.0.0.11
– BlindsT3 unit number decoded
– MCZ 1 or 2 fans selection added
– Lighting4 added for RFXtrx315

RFXmngr program version 18.0.0.12
– special MCZ receiver (434.50MHz) added

Firmware changes in versions 433_1009
– RFY corrected

RFXmngr program version 18.0.0.10
– MCZ fan2 selection 0 added for 1 fan models

Firmware changes in versions 433_1006
– Motorlux added
– Seav TXS4 added
– Livolo updated
– WS3500/4500 rain sensor corrected

RFXmngr program
– FAN ID2 corrected
– FAN – SEAV added

Maintenance release with updates for AC, Livolo, LightwaveRF and RAEX.

Firmware changes in versions 433_1003
– Cartelectronic added to Type2 firmware
– Rubicson/IW008T/TX95 corrected
– WS3500/WS4500 temperature corrected
– MDRemote V108 added

RFXmngr program
– MDRemote V108 added

Firmware changes in versions 433_1001
– Firmware type Ext2 released
– Firmware version numbering is changed
– Firmware Type displayed in response message
– IT protocol PROmax, FA500S, FA500WD, FA500DSS added (Ext2)
– Auriol Z31055B-TX sensor added (Ext2)
– WS1200 battery low indicator added
– Chuango, Eminent security sensors added:
–    decoded as Lighting4 in Type1, Type2 and Ext
–    decoded as X10 in Ext2
– Confexx blind motor added (Ext2)

RFXmngr program
– Confexx blind motor added
– Lighting5 – IT protocol added
– Firmware type displayed

New firmware released for the RFXtrx433 and RFXtrx433E
Please read chapter 2 of the RFXtrx User Guide.pdf to see which firmware type supports the protocols you need.The preferred firmware version for the RFXtrx433E is the Ext firmware.
The preferred firmware version for the RFXtrx433 is the Type1 or Type2 firmware.
Type1 or Type2 firmware can be flashed in the RFXtrx433 and the RFXtrx433E.

Firmware changes in versions 433_95/195/251
– OWL CM180 updated
– Maverick ET-733 added
– Maverick ET-732 ID added (Type2 & Ext)
– Alecto WS1700/3500/4500 negative temp corrected
– Viking 02813 added
– WS1200 updated
– ARC & Lighting4 can be enabled both (ARC/BBSB has priority)
– Lighting4 improved
– New PCR800 added
– ASP blind motors added (Type1 & Type2)
– Avantek added (Ext only)
– HQ COCO-20 added (Ext)

RFXmngr program
– Avantek added
– ASP BlindsT11 added
– HQ COCO-20 added