RFXCOM blog

Firmware changes in versions 433_1013
– Kangtai is Cotech, SilverLine,… added (Ext2)
– Kerui improved

RFXmngr program version 18.0.0.17
– Lighting5 – Kangtai added
– Screenline commands updated
– ASA id displayed

Firmware changes in versions 433_1012
– Screenline added (Ext2)
– Kerui improved (Ext2 + X10 enabled)
– Mertik G6R-H4T1 improved
– MCZ check on valid command added

RFXmngr program version 18.0.0.14
– BlindsT13 – Screenline added
– MCZ ID displayed
– MCZ No Air added

RFXmngr program version 18.0.0.15
– SEAV changed

RFXmngr program version 18.0.0.16
– MCZ zero fan speed added
– MCZ check on valid commands added

Firmware changes in versions 433_1011
– MCZ pellet stove 3 fan model added

RFXmngr program version 18.0.0.13
– MCZ 3 fans selection added

Firmware changes in versions 433_1010
– Marquant 934134 added in Type2
– ARC undecoded updated

RFXmngr program version 18.0.0.11
– BlindsT3 unit number decoded
– MCZ 1 or 2 fans selection added
– Lighting4 added for RFXtrx315

RFXmngr program version 18.0.0.12
– special MCZ receiver (434.50MHz) added

Firmware changes in versions 433_1009
– RFY corrected

RFXmngr program version 18.0.0.10
– MCZ fan2 selection 0 added for 1 fan models