RFXCOM blog

Firmware version 433_1028

• LightwaveRF receive corrected
• Imagintronix/Opus corrected
• AB400 added in Pro1
• TFA 30.3133/3156/3160 added

Firmware version 433_1027

• Ambient Weather WS-14 pool sensor added
• BWR102 added
• Impuls added
• Cuveo added

During startup the receiver measures the RF noise level. The RFnoise level is displayed in RFXmngr and  should be aroung 90 (lower is better).
If the RF noise level is much higher position the RFXtrx antenna on a better location to find the lowest RF noise level.

Firmware version 433_1026

• Receive decoding changed and multiple protocols can be enabled with less reduction in sensitivity
• Livolo appliance changed to Livolo 1 to 10 with more commands supported (needs an application change)
• Oregon SL109 added
• RAW receive and transmit added

During startup the receiver measures the RF noise level. The RFnoise level is displayed in RFXmngr and  should be aroung 90 (lower is better).
If the RF noise level is much higher position the RFXtrx antenna on a better location to find the lowest RF noise level.

Firmware changes in version 433_1025

• Byron SX improved
• Visonic WTN201 detection added
• BTHGN129 temperature corrected for 0 and -0.1 degrees Celsius
• Kerui motion sensor correct reported as X10 motion sensor
• Livolo update for Scene cmd
• Mertik G6R-H4TB updated

Firmware changes in version 433_1024

• Viking 02038 version 03/2017 improved
• Telldus temp/hum sensors 313159 and 313160 are supported

Firmware changes in version 433_1023

• A-OK AC127 added
• Cartelectronic improved
• LightwaveRF updated
• Livolo updated

Firmware changes in version 433_1022

– Kerui gas and CO2 detectors supported
– 1byOne improved
– Energenie transmitted packets increased
– Imagintronic/Opus improved
– A-OK corrected

Firmware changes in version 433_1021

– new WS1200 detected
– Blyss receive improved
– BLYSS Temp/Hum sensor 630467 added in Ext
– BlindsT1 improved (Type1/2)
– BlindsT2 and BlindsT3 improved
– Cartelectronic Linky added

Firmware changes in version 433_1020
– Temp/Hum sensor AOK2011/2026 added as Rubicson
– Chuango keyfob added in Ext2
– BlindsT3 A-OK AC114 unit code forced to 1
– New Banggood DANUI ensor supported in Ext firmware

Firmware changes in version 433_1017
– RM174RF always battery full indicated
– Chuango updated
– BLYSS Temp/Hum sensor 630467 added in Type1 & Type2
– BTHGN129 updated
– Energenie improved
– Imagintronix improved