August 18, 2018

New Pro1 firmware BETA version 1026 and RFXmngr

Filed under: Firmware — RFXCOM @ 8:20 am

Firmware version 433_1026

  • Receive decoding changed and multiple protocols can be enabled with less reduction in sensitivity
  • Livolo appliance changed to Livolo 1 to 10 with more commands supported (needs an application change)
  • Oregon SL109 added
  • RAW receive and transmit added

During startup the receiver measures the RF noise level. The RFnoise level is displayed in RFXmngr and  should be aroung 90 (lower is better).
If the RF noise level is much higher position the RFXtrx antenna on a better location to find the lowest RF noise level.

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress