February 8, 2019

Updated Pro1, Pro2 and ProXL1 firmware version 1035

Filed under: Firmware — RFXCOM @ 3:56 pm

New firmware released for the RFXtrx433E and RFXtrx433XL.
Please read chapter 2 of the RFXtrx User Guide.pdf to see which firmware type supports the protocols you need.
The RFXtrx433 can only use Type1 or Type2.
The RFXtrx433E can use Ext, Ext2, Pro1 or Pro2. Pro1 is the preferred firmware.

Type1 or Type2 firmware can be flashed in the RFXtrx433 and RFXtrx433E.

The RFXtrx433XL can only use ProXL firmware!!!!!!!
Important: Use RFXflash to flash the RFXtrx433XL

FW release 433_1035

  • Meiantech enable supported
  • Byron BY added
  • Envivo receive added in XL
  • Lighting4 improved
  • Oregon/CM113 improved
  • Oregon 1.0 updated
  • Kerui improved
  • Kerui CO/gas/shock sensor decoded as motion sensor
  • THGR221 added
  • AC receive improved for AWST6000
  • WSD10 corrected
  • Auriol H13726 corrected
  • Xiron updated
  • RFXtrx433XL – Legrand CAD added

No Comments

No comments yet.

RSS feed for comments on this post. TrackBack URL

Sorry, the comment form is closed at this time.

Powered by WordPress