Firmware changes in versions 433_1007
– Firmware code optimized
– Lighting4 low pulse timing accepted
– WS1700 battery empty indication removed
– THN129 added
– Philips SBC unit 9-16 updated
– RM174RF smoke detector added (Ext2 firmware)
– Westinghouse fan control 7226640 added (Ext2 firmware)
– TFA 30.3056 and 30.3216 pool sensor added
RFXmngr program version 18.0.0.8
– Lighting1 – Philips SBC unit 1 – 16
– RM174RF smoke detector added
– Westinghouse fan added
– TFA 30.3056 pool sensor added
– ID displayed in hex and decimal
Firmware changes in versions 433_1006
– Motorlux added
– Seav TXS4 added
– Livolo updated
– WS3500/4500 rain sensor corrected
RFXmngr program
– FAN ID2 corrected
– FAN – SEAV added
Maintenance release with updates for AC, Livolo, LightwaveRF and RAEX.
Firmware changes in versions 433_1003
– Cartelectronic added to Type2 firmware
– Rubicson/IW008T/TX95 corrected
– WS3500/WS4500 temperature corrected
– MDRemote V108 added
RFXmngr program
– MDRemote V108 added
Firmware changes in versions 433_1002
– Cartelectronic TIC & Encoder added
– BlindsT6 updated
– ByronSX + Oregon enabled improved
– Somfy improved
– Mertik G6R-H4T1 improved
– WS1200 improved
RFXmngr program
– Transmit Confexx correct decoded
– Cartelectronic TIC/Encoder added
– Envivo transmit correct decoded
– RFY channel corrected
– Livolo dim and scene commands added
Firmware changes in versions 433_1001
– Firmware type Ext2 released
– Firmware version numbering is changed
– Firmware Type displayed in response message
– IT protocol PROmax, FA500S, FA500WD, FA500DSS added (Ext2)
– Auriol Z31055B-TX sensor added (Ext2)
– WS1200 battery low indicator added
– Chuango, Eminent security sensors added:
– decoded as Lighting4 in Type1, Type2 and Ext
– decoded as X10 in Ext2
– Confexx blind motor added (Ext2)
RFXmngr program
– Confexx blind motor added
– Lighting5 – IT protocol added
– Firmware type displayed
New firmware released for the RFXtrx433 and RFXtrx433E
Please read chapter 2 of the RFXtrx User Guide.pdf to see which firmware type supports the protocols you need.The preferred firmware version for the RFXtrx433E is the Ext firmware.
The preferred firmware version for the RFXtrx433 is the Type1 or Type2 firmware.
Type1 or Type2 firmware can be flashed in the RFXtrx433 and the RFXtrx433E.
Firmware changes in versions 433_95/195/251
– OWL CM180 updated
– Maverick ET-733 added
– Maverick ET-732 ID added (Type2 & Ext)
– Alecto WS1700/3500/4500 negative temp corrected
– Viking 02813 added
– WS1200 updated
– ARC & Lighting4 can be enabled both (ARC/BBSB has priority)
– Lighting4 improved
– New PCR800 added
– ASP blind motors added (Type1 & Type2)
– Avantek added (Ext only)
– HQ COCO-20 added (Ext)
RFXmngr program
– Avantek added
– ASP BlindsT11 added
– HQ COCO-20 added
RFXflash program
– RFXtrx868X support added
– TCP/IP support added
New firmware released for the RFXtrx433 and RFXtrx433E
Please read chapter 2 of the RFXtrx User Guide.pdf to see which firmware type supports the protocols you need.The preferred firmware version for the RFXtrx433E is the Ext firmware.
The preferred firmware version for the RFXtrx433 is the Type1 or Type2 firmware.
Type1 or Type2 firmware can be flashed in the RFXtrx433 and the RFXtrx433E.
Firmware changes in versions 433_94/194/250
– Lucci Air fan added (Ext)
– Inovalley S80 plant humidity sensor added (Ext)
– Rubicson pool sensor 48.019 added (Ext)
– ARC improved with RSL enabled (Type1)
– Blyss transmit improved
RFXmngr program
– TCP/IP support added
– Lucci Air fan added
– Inovalley S80 plant humidity sensor added
New firmware released for the RFXrec433, RFXtrx433 and RFXtrx433E
Please read chapter 2 of the RFXtrx User Guide.pdf to see which firmware type supports the protocols you need.The preferred firmware version for the RFXtrx433E is the Ext firmware.
The preferred firmware version for the RFXtrx433 is the Type1 or Type2 firmware.
Type1 or Type2 firmware can be flashed in the RFXtrx433 and the RFXtrx433E.
Firmware changes in versions 433_93/193/249
– Mertik G6R-H4T16 added
– MDremote version 107 added
– Legrand CAD radio added (Ext only)
– Conrad RSL sensors improved (Type2 only)
– UPM improved (Type1 only)
– Cresta receive improved
RFXmngr program
– Legrand CAD added
– MDremote version 107 added
– Group code H corrected for Lighting6
– RSSI also displayed in dBi
Powered by WordPress